Best Chint Smart Gas Meter - Aluminum ZG1.6 - 1 Exporters, Products

Overview

The ZG1.6 - 1 is an IC - card prepayment intelligent gas meter with an aluminum case, engineered for modern gas measurement requirements.

Application Scope

It is applicable for measuring the flow of gases like natural gas and liquefied petroleum gas, and is mainly used for prepayment management by gas companies.

Technical Parameters

Nominal Flow Rate: 1.6m³/h (qmax: 2.5m³/h, qmin: 0.016m³/h).
Operating Pressure: 0.5kPa to 20kPa.
Power Parameters: Rated DC 6V, static current < 10μA, max current < 200mA.
Impulse Constant: 0.1m³/impulse or 0.01m³/impulse.
Total Pressure Loss: ≤ 250Pa.
Operating Temperature: -10°C to +40°C (up to -25°C to +55°C on request).
Basic Error Limit: ±1.5% (0.1qmax≤q≤qmax), ±3% (qmin≤q<0.1qmax).
Max Reading: 99999.999m³.
Connection: M30x2 thread, 130mm distance between centers.
Weight: Approximately 2kg.

Product Features

Intelligent Control: Uses a 16-bit low-power-consumption MCU for intelligent control and a logic card as the information carrier.
One-Card-One-Meter: Highly secure setup with dedicated cards and independent keys for each user card.
Function Completeness: Supports allowable purchase volume settings, alarm volume, pre-closing valve parameters, low battery reminders, and illegal operation recording.
Good Sealing: Sealed control module protects components from kitchen water vapor and lampblack.
Safety Assurance: Equipped with a certified high-reliability valve that automatically cuts off the gas when power is off.
Simple Operation: One-button multi-function design allows easy querying and simple user operations.
Compliance with Standards: Performance meets OIML R137-1 & 2 standards.

Specifications

Category	Specifications
Model Name	Smart Gas Meter - Aluminum ZG1.6-1
Type	IC-card prepayment smart gas meter
Shell Material	Aluminum alloy (die-cast)
Applicable Gas	Natural gas, liquefied petroleum gas (LPG)
Nominal Flow Rate (qn)	1.6 m³/h
Maximum Flow Rate (qmax)	2.5 m³/h
Minimum Flow Rate (qmin)	0.016 m³/h
Operating Pressure Range	0.5 kPa - 20 kPa
Total Pressure Loss	≤ 250 Pa
Power Supply	DC 6V (usually 4 x AA alkaline batteries)
Static Working Current	< 10 μA
Maximum Instantaneous Current	< 200 mA
Pulse Constant	0.1 m³/impulse or 0.01 m³/impulse
Maximum Reading	99999.999 m³
Basic Error Limit	±1.5% (0.1qmax ≤ q ≤ qmax); ±3% (qmin ≤ q < 0.1qmax)
Operating Temperature	Standard: -10°C to +40°C; Special: -25°C to +55°C
Connection Thread	M30×2
Distance Between Centers	130 mm
Weight	Approximately 2 kg
Compliance Standard	OIML R137-1 & 2

Models

Available Model: Smart Gas Meter - Aluminum ZG1.6 - 1

Delivery Information

Weight: 2kg
Battery parameters: Equipped with four AA alkaline batteries
Delivery information typically includes delivery times, shipping methods, packaging, etc., which may vary depending on the seller and the location of purchase.

Manuals & Resources

Smart Gas Meter - Aluminum ZG1.6 - 1 datasheet.pdf

Document Request

Frequently Asked Questions

What types of gases can the ZG1.6-1 gas meter measure?

The ZG1.6-1 is suitable for measuring the flow of natural gas and liquefied petroleum gas (LPG).

What is the operating pressure range of this gas meter?

The operating pressure range for the ZG1.6-1 smart gas meter is between 0.5kPa and 20kPa.

How is the gas meter powered, and what is its battery requirement?

The meter operates on a DC 6V power supply, which is typically equipped with four standard AA alkaline batteries.

Does the ZG1.6-1 gas meter feature safety shut-off capabilities?

Yes, it features a highly reliable, certified valve that automatically cuts off the gas flow when the power supply is cut off or when battery voltage runs low.